Follow Up Warning To Increasing The Alcohol Level In Your Wine

I received a very insightful reponse to my most recent post on increasing the alcohol level in your wine, which I thought I should share with you all as there is a “darker side” to it that you should be aware of!

Mark writes:

“I have a couple comments on your blog post.  First of all, you should add a caution statement about adding sugar into fermenting wine.  It needs to be added very slowly.  The first time I did this, I dumped about 4 lbs of sugar into my 6 gallon primary while it was still actively fermenting.  WOW what a mess.  It foamed up like crazy and overflowed the primary bucket and went all over the floor.  Lesson learned. 
 
The next point is that I have found that adding extra sugar at the beginning has much the same affect if all you want is about 15% alcohol.  If you start with a brix of about 30-32 I usually end up with at least 15% alcohol without having to add sugar a second time.
 
Lastly, there may be a consideration on the type of yeast you use.  Some yeasts will burn themselves out and drown in the alcohol when it gets up around 13-14%.  I have not experimented much with this but I do know that Cote des Blancs has a good tolorance for higher alcohol content.
 
As far as the taste is concerned, you may find that the final RS needs to be higher in the bottled wine if the alcohol content is higher to achieve the same taste as you’d have with a lower alcohol content.  That has been my experience anyway.
 
I hope this information helps.

- Mark”

Thanks Mark – certainly worth mentioning to everyone!

- Scott “The Wine Making Guy”

How To Make Wine: Different Ways To Degas Your Wine

One of the most important aspects of wine making is degassing once the fermentation is completed and this blog post will show you a variety of videos which demonstrate different ways of accomplishing this.

This is the part in any wine kit instructions where they say to “stir vigorously” (with a spoon or drill attachment) for a minimum of 2 minutes so that you can flatten your wine out.  If you’ve ever tasted homemade wine that hasn’t been properly degassed you can tell as it has a bit of a “fizzy” taste to it and it just doesn’t taste very good.

Video 1: The Basics of Wine Degassing

The other issue you’ll have if you don’t degass your wine properly is that your cork could pop out of the bottle or, worse case, your bottle could potentially explode due to the build up in pressure in the bottle.

In An Ingenius Way To Degas Your Wine I showed how you could use a wine vacuum pump (i.e. what you could use to suck out the air in a half-drunk bottle of wine) to degas your wine.

Video 2: Using A Wine Vacuum Pump To Degas Your Wine

I use this method with every batch of wine I’ve made since I discovered it, and the results have been fantastic! The biggest thing you’ll notice is that your wine comes out nice and silky smooth.

The brand of wine vacuum I used in the above video is “Snail”. You can find it by going here (it’s about 2/3rds of the way down the page).

Here are a few other videos that I found on YouTube that demonstrate different ways you can degas your wine. Hopefully one or more of them peaks your interest!

Video 3: Degassing Your Wine Using Your Washing Machine

Video 4: Degassing Your Wine Using A FoodSaver

Other methods I’ve heard used to degas your wine include:

1. The “Manual Method” where you grab your carboy and shake it with your hands (although this sounds really messy if the airlock pops off).
2. The “Sparging Method” where you place an air stone with a tube attached to it on the bottom of your carboy and pump nitrogen through it. The nitogren is an inert gas and will force the carbon dioxide out of your wine. This is a bit more involved (and expensive) and is one I’ve never tried myself.

It ultimately doesn’t matter which method you use so long as you do it!

If you have a different method you use please let me know by leaving a comment below!

To your wine making success,

- Scott “The Wine Making Guy”

How To Make Wine: The Essential Ingredients Explained

I’ve received numerous requests from people asking to explain what the main ingredients/chemicals used in wine making are and why they’re used.

Here’s a quick video I shot today that will give you some good insight into why we use things like:

• Bentonite
• Potassium Metabisulphite
• Potassium Sorbate
• Isinglass
• Yeast Nutrient
• Pectic Enzyme
• Acid Blend
• Campden Tablets
• Sanitol

So if you’ve always wanted to know what each was used for check out the video below!

- Scott “The Wine Making Guy”

Wine Making Using Household Items

Here’s another interesting video that I found on YouTube that shows you how to make wine using store bought grape juice.

 
This type of wine would probably fall under the “Baby Duck” category – easy to drink and it’ll give you a good buzz, but not something that’s going to win any awards.

If you make this wine let me know how it turns out!

- Scott “The Wine Making Guy”

How To Make Wine From Coca Cola

Have you ever considered making wine from Coca Cola?

I can’t really say I had … at any point in time, but I came across this video on YouTube and it peaked my interest.

See for your selfL

Sounds tempting until you see what happens when he tastes his wine “experiment” …

So what do you think? Something you’d try?

- Scott “The Wine Making Guy”

Great Idea For Labelling Your Carboy During Wine Making

Click To View a Larger Photo

Here’s how the author did it:

Recently, I have had a lot of request about where I got the signs I have on my carboys.   Well I just took some Mardi Gras beads (everyone has some of these around the house) and cut them to about 10 inches.   Then I cut up some thin plastic, which I believe was excess bathroom shower liner I had cut off some time ago.  I made small squares for the labels, and glued the Mardi Gras beads to them.   Then I just used my label maker for the wine type and year.   I kept mine in separate lines so I can don’t have to print out full labels each time.  I’ll just keep them from each type and change the year with each new batch.   If you’ve got a good idea, be sure to mention it in the wine forum where everyone is constantly learning.

I’m typically not as fancy as I write info onto either masking tape or a Post-It Note (see below) and then place that on the carboy

Masking Tape Carboy Label

Post-It Note Carboy Label

For me these are more functional (and easy to do) but I thought the above idea was pretty cool nonetheless.

How do you tag your carboys when aging your wine?

- Scott “The Wine Making Guy”